In a cool, dry, ventilated place to prevent moisture and rain. Transportation by non-dangerous goods transport, high-strength polymer mortar (repair, plaster, reinforced only) This product is made of imported polymer-based agents formulated, is a new type of high-quality powder adhesives, concrete building is repaired ideal material for cellular repair the surface of loopholes, such as leakage and plaster reinforcement bars and permeable, and other projects that can be used with stainless steel wire reinforcement. ◆ Product Features 1. Fire-resistant, high temperature resistance, corrosion resistance, good aging properties 2. This product is high strength; excellent adhesive properties, suitable for plastering operation, after curing of concrete similar to freeze-thaw resistance and good durability and long-term stability is maintained in good condition. 3. Gas permeability is poor, which prevents the internal reinforcement of concrete carbonation and corrosion protection play a good role 4. No shrinkage, moderate internal performance without cracking. Simple construction operations. ◆ Scope: 1. Plaster reinforced concrete structures. 2. Can be used for stainless steel wire mesh reinforcement. 3. The surface of the cellular repair of concrete structures, vulnerabilities, missing ribs, sand, cracks and other defects. ◆ Configuration: powder: water = 5:1-1.2 (weight ratio) stir into a state suitable for thick plaster operation, to stir. ◆ Construction steps: 1. Primary treatment: First remove the original concrete base surface grease, debris, with loose material and water wet grass. 2. Construction methods: ● stratified according to the actual operating conditions, when the underlying hierarchical job plastering operation should grind when using matte favor when the next full adhesive plaster. Same with ordinary mortar construction methods. ● used for repairing defects in concrete must be clean grass, filled to full, do not miss compaction. ● Construction of the temperature is too high or re-exposure to the sun should pay attention to maintenance, to prevent dehydration mortar surface evaporation of water does not come out too fast causing internal surface cracking ◆ Note: 1 Construction temperature should be above 5 ℃ is forbidden to add two cement, sand ., and other accessories 3 Banhao mortar should be used within 2 hours, ◆ packaging, storage, transportation: 25kg / bag, stored with care.